Enhanced oxygen evolution reaction kinetics through biochar-based nickel-iron phosphides nanocages in water electrolysis for hydrogen production

Highly-efficient and stable non-noble metal electrocatalysts for overcoming the sluggish kinetics of oxygen evolution reaction (OER) is urgent for water electrolysis. Biomass-derived biochar has been considered as promising carbon material because of its advantages such as low-cost, renewable, simple preparation, rich structure, and easy to obtain heteroatom by in-situ doping. Herein, Ni₂P–Fe₂P bimetallic phosphide spherical nanocages encapsulated in N/P-doped pine needles biochar is prepared via a simple two-step pyrolysis method. Benefiting from the maximum synergistic effects of bimetallic phosphide and biochar, high conductivity of biochar encapsulation, highly exposed active sites of Ni₂P–Fe₂P spherical nanocages, rapid mass transfer in porous channels with large specific surface area, and the promotion in adsorption of reaction intermediates by high-level heteroatom doping, the (Ni_0.75Fe_0.25)₂P@NP/C demonstrates excellent OER activity with an overpotential of 250 mV and a Tafel slope of 48 mV/dec at 10 mA/cm² in 1 M KOH. Also it exhibits a long-term durability in 10 h electrolysis and its activity even improves during the electrocatalytic process. The present work provides a favorable strategy for the inexpensive synthesis of biochar-based transition metal electrocatalysts toward OER, and improves the water electrolysis for hydrogen production.     

Optical properties and radiation stability of SiO2/ZnO composite pigment prepared by co-sintering method

Thermal control coatings (TCCs) are an essential part of the thermal control systems in the spacecraft. Solar absorptance and emittance are the key performance parameters of TCCs. To develop an ultra-low solar absorption and stable inorganic TCCs for surface radiator, different TCCs were prepared by co-sintering ZnO and SiO₂ nanoparticles to form Zn₂SiO₄/SiO₂ pigment in this work, and the optical properties and radiation stability were systematically studied. It is found that the coating based on composite pigment has high reflectivity in the ultraviolet band and excellent optical performance possessing the low solar absorption of 0.06. In addition, the Zn₂SiO₄/SiO₂ coating demonstrates the highest proton and electron radiation stability because that SiO₂ between Zn₂SiO₄ particles acts as the relaxation center of the defects caused by radiation.     

Importance of optical homogeneity for high-quality transparent ceramics

Two types of transparent Y₂O₃ ceramics without including large scattering sources such as residual pores, one with very high optical homogeneity (type A) and another one with slightly insufficient optical homogeneity (type B), are purposely prepared, and their optical properties are investigated and compared qualitatively and quantitatively. Type A ceramic exhibits transmittance characteristics with very low internal loss in the visible to infrared wavelength region, while type B ceramic is inferior in various optical performances especially in the short (visible) wavelength region. In type B ceramic, birefringence occurs due to optical inhomogeneity in the visible region, resulting in a decrease in the extinction ratio. Non-uniform refractive index distribution is also observed in the Schlieren image of type B ceramic, hence the laser beam quality through that material is degraded. This study proved the importance of optical homogeneity of transparent ceramics and clarified the problems in actual applications.     

A kinetic model involving oxidation and volatilization in SiC-B4C-xAl2O3 ceramics system

In this paper, a new kinetic model considering both oxidation and volatilization kinetics is established and applied to analyze the oxidation of SiC-B₄C-xAl₂O₃ ceramics and other systems in various oxidation conditions. The effects of diffusion area and volume changes during the oxidation process are considered in this model. The physical meaning of each parameter in this model is explicit and simple. According to this model, the diffusion coefficient of species and the corresponding diffusion activation energy are easily available. The practicability of this model is well verified by the experimental data of SiC-B₄C-xAl₂O₃ and other systems oxidized under different conditions. In addition, the practice shows that the model is applicable not only to the systems where oxidation and volatilization coexist, but also to the system where only oxidation plays a major role. We hope the model proposed in this work can be used in other materials with more complex environments.     

Adaptive reversible data hiding for JPEG images with multiple two-dimensional histograms

Joint photographic experts group (JPEG) can provide good quality with small file size but also eliminate extensively the redundancies of images. Therefore, hiding data into JPEG images in terms of maintaining high visual quality at small file sizes has been a great challenge for researchers. In this paper, an adaptive reversible data hiding method for JPEG images containing multiple two-dimensional (2D) histograms is proposed. Adaptability is mainly reflected in three aspects. The first one is to preferentially select sharper histograms for data embedding after $K$ histograms are established by constructing the $k$th ($k\in \{1,2,\dots ,K\}$) histogram using the $k$th non-zero alternating current (AC) coefficient of all the quantized discrete cosine transform blocks. On the other hand, to fully exploit the strong correlation between coefficients of one histogram, the smoothness of each coefficient is estimated by a block smoothness estimator so that a sharply-distributed 2D-histogram is constructed by combining two coefficients with similar smoothness into a pair. The pair corresponding to low complexity is selected priorly for data embedding, leading to high embedding performance while maintaining low file size. Besides, we design multiple embedding strategies to adaptively select the embedding strategy for each 2D histogram. Experimental results demonstrate that the proposed method can achieve higher rate–distortion performance which maintaining lower file storage space, compared with previous studies.     

Decomposition and replacement: Spatial knowledge distillation for monocular depth estimation

Knowledge distillation has become a key technique for making smart and light-weight networks through model compression and transfer learning. Unlike previous methods that applied knowledge distillation to the classification task, we propose to exploit the decomposition-and-replacement based distillation scheme for depth estimation from a single RGB color image. To do this, Laplacian pyramid-based knowledge distillation is firstly presented in this paper. The key idea of the proposed method is to transfer the rich knowledge of the scene depth, which is well encoded through the teacher network, to the student network in a structured way by decomposing it into the global context and local details. This is fairly desirable for the student network to restore the depth layout more accurately with limited resources. Moreover, we also propose a new guidance concept for knowledge distillation, so-called ReplaceBlock, which replaces blocks randomly selected in the decoded feature of the student network with those of the teacher network. Our ReplaceBlock gives a smoothing effect in learning the feature distribution of the teacher network by considering the spatial contiguity in the feature space. This process is also helpful to clearly restore the depth layout without the significant computational cost. Based on various experimental results on benchmark datasets, the effectiveness of our distillation scheme for monocular depth estimation is demonstrated in details. The code and model are publicly available at : https://github.com/tjqansthd/Lap_Rep_KD_Depth.     

A viable approach to prepare 3C-SiC coatings by thermal MOCVD using commercial grade precursors

A series of 3 C-SiC coatings were prepared by organometallic chemical vapor deposition (MOCVD) using precursor solution containing a varying proportion of commercial-grade hexamethyldisiloxane (HMDSO) and n-hexane. The phase composition, bonding state, and microstructure of 3 C-SiC coatings were studied in detail by grazing incidence X-ray diffraction (GIXRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The microstructure and mechanical properties of the optimal 3 C-SiC coating were characterized by scanning transmission electron microscopy (STEM) and nanoindentation, respectively. Our results revealed that the amount of undesired graphite phase can be significantly reduced in the 3 C-SiC coating by introducing hydrogen gas in the reaction chamber alongside increasing the ratio of HMDSO/n-hexane in the precursor mixture. The STEM results revealed that the optimal coating was predominantly composed of nano-crystalline 3 C-SiC grains alongside a small amount of amorphous graphite. The hardness and elastic modulus of the optimal coating were 38.19 GPa and 363.2 GPa, respectively.     

A novel method of shrimp blanching by CO2 heat pump: Quality,energy, and economy analysis

To reduce the energy consumption of the shrimp blanching process and improve the economic value of the blanched product, a transcritical CO₂ heat pump blanching system (THPB system) was designed in this paper. The trends of astaxanthin were investigated at atmospheric pressure near boiling temperature, combined with the color and structural properties of shrimp samples, and the optimal blanching times of 270 s and 240 s were obtained at 90°C and 95°C, respectively. In contrast to the fuel blanching system (FB system) at 100°C, the annual standard coal consumption of the THPB system with 90°C blanching is decreased by 79%, and the annual operating cost can be saved by CNY 63,800, with a payback period of about 3.13 years.Industrial relevanceBlanching is one of the effective ways to prolong the shelf life of shrimp. However, the research on the blanching time and temperature of shrimp is not comprehensive. In addition, the traditional fuel blanching process has high energy consumption and pollution, and can no longer meet the quality requirements of the modern food processing industry. Heat pump has been shown to have better performance in food drying, but it is less used in blanching. The information presented in this study may provide other insights into food processing.